Automatic round can production line
The can making production line is suitable for the automatic production of 10-20L square can, which is composed of three metal plates: can body, can cover and can bottom. The can is square shaped.
Technical flow:cutting the tin sheet to blank-rounding-welding-inner and outer coating
(inner powder coating and outer coating)-drying-cooling conveying-square expanding-panel,
corner embossing-upper flanging-lower flanging-bottom lid feeding-seaming-turning over-
top lid feeding-seaming-leak testing-packaging
Main Features
1. More than 20 years experience and reputation both at home and abroad;
2. Quality Assurance, excellent after service and reasonable price;
3. Reliable and safe to control, easy to operate and maintain;
4. Equipped with human-computer interface and PLC; adopt digital control technology;
5. Full automatic, semi-automatic, and multi mould, suitable for different cans shape and size.
Big square can automatic production line operating process
First place the cut can body materials into the automatic resistance welding machine's feeding table,Suck by the vacuum suckers,send the tin blanks to the feeding roller one by one.through the feeding roller,the single tin blank is fed to the rounding roller to conduct rounding process,then it will be fed to the rounding forming mechanism to make
rounding.The body is fed into the resistance welding machine and make welding after the accurate positioning.After welding,the can body is automatically fed into the rotary magnetic conveyor of the coating machine for outer coating,inner coating or inner powder coating, Which depends on customer's various need.It is mainly used to prevent the side welding seam line from being exposed in air and rusting.The can body should be placed in induction drying oven to dry if it's inner coating or inner powder coating.Afer drying, It will be fed to cooling device to make natural cooling.The cooled can body is then fed to the big square can combination machine,and the can body is in an upright state going through the uprighting conveyor.It is fed to the first automatic side welding seam indexing station by the clamps.The second station is square expanding.When the can body is in position,on the can body lifting tray which is controlled by a servo motor,and the can body is sent by this lifting tray to the square expanding mold to make square expanding.The third station is to make panel and corner embossing.When the can body is in position, on the can body lifting tray which is controlled by a servo motor,and the can body is sent by this lifting tray to the make panle and corner embossing at a time.The fourth station is top flanging,the fifth station is bottom flanging.The bottom flanging:the can will be sent to the bottom flanging mold lying on the upper part of the machine by lifting tray to make it.The top flanging:the upper cylinder will press the can body to the position of top flanging mold to make it.Both the top and bottom can body flanging are each driven by four cylinders.The sixth station is automatic lid detecting and feeding and seaming.After the above six procedures,the can will be reversed up and down by reversing device,and then make top seaming,this process is the same as the bottom seaming process.Lastly.the finished can is fed by conveyor to automatic leak tester station.After accurate air source inspection,unqualified products are detected and pushed to a fixed area,and qualified products will come to the packaging workbench for the final packaging process.
Equipment composition of round cans automatic production line
The layout of the production line
Tin can making artcraft
10-20L square can flowing chart